Chinese Factory Manufactured 0.3mm 0.5mm 0.7mm PVC Wear-Resistant Layer for Spc Floor

• Customization: Available
• After-sales Service: 3-6 Months
• Warranty: 3-6 Months
• Model NO.: wearing layer
• Certification: SGS
• Application: Floor
• Color: Transparent
• Self-Adhesive: Not Self-Adhesive
• Surface Treatment: Embossed
• Transport Package: Wooden Pallet & Wooden Case
• Specification: 990MM
• Trademark: ATE
• Origin: China
• HS Code: 392043
• Production Capacity: 5000000m/Month

Product Description

Plastic flooring product differences

Item	SPC Flooring	LVT Flooring	WPC Flooring
Technology	Extruder hot post	Press hot post	Press hot post
Hot post duration	15-30 seconds	20-30 minutes	20-30 minutes
Heating temperature	170-180 degree	135-145 degree	135-145 degree
Wear-resistant lamination	Supergroove	Deep groove	Deep groove

DRFT quality standard

Quality standard:
Item		Standard values	Inspection method	Frequency	Tool
	Thickness(mm)	Order thickness + line thickness	Measure the thickness of tape from the first point to the fifth point and record.	Every 5-10	Thickness gauge
Size	Width(mm)	0--+4mm	Use a tape measure to measure the width of the whole piece and the difference between the obtained data and the width data required by the specification		Steel measuring tape
				Every 10
	Weight(kg)	As per thickness	Electronic scale weighs	Every 5-10	Platform scale

Quality standard:
Item		Standard values	Inspection method	Frequency	Tool
	Colors, transparency	Up to sample	Mark:(1)
Appearance				Every 5-10
	Hardness	Up to sample	Mark:(2)
	Impurities, fibers(3)	8 /y↓	Visual: Take the film in the light station for inspection		Visual
	Roll up	Within 5mm	Mark:(6)
	Air spot(4)	No long air spots	Visual: Take the film in the light station for inspection

 

Quality standard:
Item		Standard values	Inspection method	Frequency	Tool
Flatten	Circumference difference	Maximum difference between middle and high 3mm	Roll the finished product to measure every one to five circle difference. Mark (5)
		Not small in the middle		Every 10	Steel measuring tape
	Deflect	Difference between two points≤2mm
		0.15-0.20mm  5.0%↓
		0.25-0.30mm  4.0%↓	Take 5×25cm longitudinally in the middle of the film, mark 20CM in the middle of the boiling water bath for 60 seconds, measure with a ruler and calculate the shrinkage rate.Mark(7)
Shrink	Water bath(%)	0.45-0.50mm  1.5%↓
				Every 10	Ruler

 

Quality standard:

Announcements

This kind of product customers to the bottom as the surface, focus on checking the bottom, both sides of the light is consistent, no gas marks, obvious flower surface, no wrinkles, bad roll must be changed. Note 1:1, under the same conditions of thickness, embossed, light fog, direct light and refraction direction, visually check the difference between the standard color of the finished product and the sample. 2. Take A4 sample of each finished product and compare it. Note 2: The finished product is compared with the sample or the standard template of softness and hardness by finger touch at normal thickness and temperature. Note 3: The finished product under the light inspection perspective, due to foreign bodies, impurities, decomposition infiltration caused by visible spots or brown color. Note 4: Horizontal or perspective (transparent products), such as a slender line shape with a hollow at the end of the phenomenon. Note 5: Unfold the finished product on the display platform, cut 5m length, and place it at both ends of the 5m finished product with a straight line. The largest difference in measurement is the skew. Note 6:1, both ends of the finished product roll into a neat cutting surface. 2. The concave and convex surface of the finished product should be controlled within 5mm with the ruler. Note 7: Shrinkage rate %= (L0 original length -L1 shrinkage length) /L0 original length ×100%

Q&A.
1. Crystal impurity points
Crystal impurity is the impurities or black spots mixed in the production process, if the crystal impurity is too large or too much, the customer will appear black spots or foreign bodies on the surface after pressing into the finished floor, affecting the appearance of the effect, the customer can not accept.
2. Lotus edge
Flounce refers to the abnormal flatness of the product, the common reason is caused by the thickness of the product, when the flounce is too large, the customer in the fitting, the edge of the finished product will appear to stick, or even wrinkle.
3.Color water
It refers to the color of the wear layer itself, and the color difference will make the color difference between the finished product and the template, which can not be used.
4.Thickness, specific gravity
Thickness and specific gravity are directly related to the indicators of the number of meters of wear layer per unit weight, so customers are very concerned about these indicators that are closely related to their interests, and need to produce in strict accordance with customer requirements.
5.Heating shrinkage
The heating shrinkage value of the wear layer is a very important indicator in the process of customer use, and it should be strictly controlled within the quality standard range. If the heating shrinkage is too large, the color of the finished product produced by the customer will be deformed because of the shrinkage, which is unacceptable to the customer.
company profile

1. ATE(Adamant Technological Environmental) is a high-tech enterprise engaged in the development and production of plastic and rubber additives. We have 18 years of history in the field of plastics and rubber, with strong innovation and research capabilities and rich service experience. Our products are widely used in SPC floor, PVC pipe, PVC profile, PVC diaphragm, PVC cable and rubber products and other fields. The company headquarters is located in the national Science and technology innovation Park - Changzhou Science and Education City
2. As embodied in the company name, we ATE (Adamant Technological Environmental) are adhering to the "injected extraordinary energy to the global rubber industry" mission, determined to walk the road of science and technology, environmental protection.
3. Our company has three industrial production bases in Nantong, Yancheng and Changzhou, Jiangsu Province, and has established close industry university research cooperation with Chinese Academy of Sciences, East China University of Science and Technology, Hefei University of Technology and University of Science and Technology of China, and has built graduate work stations. The company has successively participated in the "973" national Key Basic Research and Development Program and the "863" high-tech research and development program, and has 3 provincial scientific and technological achievements transformation projects, 12 high-tech products, 126 invention patents, and more than 30 utility model patents. The company has developed organic zinc, calcium zinc heat stable materials, solid plasticizer materials, molding materials, toughening materials and many other high-tech products, which have been well received by customers and recognized by the industry.
4. Our corporate culture is "virtue, learning, execution, innovation". We are committed to helping our customers maintain continuous business growth with the highest priority to provide excellent customer satisfaction. You are welcome to cooperate with us.

Main products

1. Our products are widely used in the production of stone plastic flooring, PVC materials and rubber products.
2. In the field of stone plastic floor manufacturing, we produce calcium zinc stabilizer S-197, and high performance composite material A1-705, the ionic polymer ACR-401 and chlorinated polyethylene CPE-135A. In addition, the company has independently developed the SPC special package material ATE-985, which is composed of special ionomer, acrylate and high-efficiency calcium and zinc stabilizer.
3. In the production of PVC pipes, in addition to ACR-401 and CPE-135A, we also have a new and better calcium and zinc stabilizer G0106GA, and a modifier P-701M that can increase the impact resistance of pipes in low temperature environment.
4. In the field of PVC profiles, we have ACR-401, CPE-135A, And special calcium zinc stabilizers G0107B and G0107A1 for common profiles and door and window profiles, respectively. In addition, there are additives A1-705 and K-806 that can improve the resistance to impact and weather resistance. I hope it has the products you need.
5. During the production process of PVC film, we provide ACR modifiers P-550 and p-156, which can accelerate the plastication and increase the surface finish of the material, and the anti-impact modifier MBS.
6. In the production of PVC cables, we can offer CPE-135A, P-550 and a forming agent WY-55 with excellent dispersibility that can increase the production rate of cables.
7. In the production of rubber and plastic products, we have CPE-135A,A1-703 and special zinc oxide with excellent dispersibility, which can improve the performance of products and further improve the processing performance of mixed gels.

Our advantage

1. We have strong research and development ability and innovation ability, with a professional research team and our own laboratory for continuous research and  development improvement and testing, can continue to introduce competitive products and services to ensure product superiority and quality stability.
2. Our company pays attention to customer experience, we have a high-quality service team, can provide customers with professional, comfortable and convenient service.
3. Our company has a perfect management system and process to ensure the efficiency and quality of service.
4. The company has a good reputation and reputation, can win the trust and support of customers, and has a good cooperative relationship with partners around the world.
5. We have strong production capacity with advanced technical equipment and facilities, can adjust the production plan according to the individual needs of customers.
6. Our company's products are high quality and low price, widely praised by partners all over the world.
7. Our company pays attention to social responsibility and environmental protection, and can contribute to the society and the environment.
8. 

   
   
    

FAQ
Q: Are you a manufacturer or a trader?
A: We are a manufacturer with our own laboratory and factory. We have three production bases in Nantong, Yancheng and Changzhou, Jiangsu Province. You are welcome to visit our factory at any time.
Q: Do you offer free samples?
A: You only need to provide the address and freight, and we will send the free samples to your address.
Q: How soon can I receive the goods after payment?
A: If it is a small batch of products, we will send it to you by international express (DHL, FedEX, TNT,etc) or by air, which usually takes 3-5 days. We will ship large quantities of products to you, which usually takes a few weeks. The specific situation depends on the port. If you have special needs, you can also contact us.
Q:How do you packing ,storage and transportation?

A: We usually use PP bags with a capacity of 25kg, or customized packing according to customer's requirements.
  Products should be kept clean during transportation and handling, to prevent sun and rain, high temperature and high humidity, and to avoid damage to the package. It should be stored in a cool, dry, direct sunlight warehouse below 40ºC and the shelf life is two years, after the shelf life it can still be used if the performance inspection is qualified.
Q: How is your service?
A: We will reply to your message within 24 hours to answer all your questions.
Q: How can you ensure that the quality of your products is qualified?
A: We always believe that integrity and responsibility are the foundation of the enterprise, so we strictly control the production process to ensure  that the products provided are qualified. Our products have passed SGS,CE,CNAS and other institutions certification, and have our own laboratory testing to ensure product quality.